Pyrrhic Victory 3D print - filament legend
====================================================
footprint: 51.2 x 51.2 mm, total height: 8.0 mm
4 stacked levels, ~2.00 mm each, flat bottom

  level  layer region   z(mm)       color     filament to assign
----------------------------------------------------------------------
  1      black          0.00-2.00       #000000   closest to #000000
  2      brown          2.00-4.00       #634026   closest to #634026
  3      yellow         4.00-6.00       #FFFF00   closest to #FFFF00
  4      border-yellow  6.00-8.00       #FFFF00   closest to #FFFF00

Layers are cumulative (each sits on the one below), so the print is
supported. Terraces expose ~2mm of each color's band.
Height order bottom->top: black < brown < inner-yellow < border.
The outer RIM is the highest band; inner face/trophy detail is one
step below it (both are yellow in the art).

In Bambu Studio: enable multi-material (AMS/AMS Lite), then set a
filament per object: black->black, brown->brown, yellow->yellow
(inner-yellow and border-yellow both take your yellow spool).